EINHELL GC-DP 3730 User Manual

GB
- 5 -
Important!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
1. Safety regulations
Caution!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
Caution!
The pump must be powered via an earth-
leakage circuit breaker (RCD) with a rated
fault current of no more than 30 mA (accor-
ding to VDE 0100 Part 702 and 738).
The equipment is not designed for use in
swimming pools and paddling pools of any
kind or other bodies of water in which people
or animals may be present during operation.
It is prohibited to operate the equipment if a
person or animal is in the danger area. Ask
your electrician!
This equipment can be used by
children of 8 years and older and
by people with limited physical,
sensory or mental capacities or
those with no experience and
knowledge if they are supervised
or have received instruction in
how to use the equipment safe-
ly and understand the dangers
which result from such use.
Children are not allowed to play
with the equipment. Unless su-
pervised, children are not allo-
wed to clean the equipment and
carry out user-level maintenance
work.
Important!
•
Before you put the equipment into operation,
arrange for a specialist to check that the
- earthing
- protective multiple earthing
- residual-current operated circuit-breaker
circuit
comply with the safety regulations of the pow-
er supply company and work correctly.
•
The electrical plug-in connections must be
protected from wet conditions.
•
If there is a risk of flooding, place the plug-in
connections in an area which is safe from
flooding.
•
Strictly avoid pumping aggressive liquids and
abrasive substances.
•
Protect the equipment from frost.
•
Protect the equipment from dry running.
•
Take suitable measures to keep the equip-
ment out of the reach of children.
•
There is a risk of the liquid becoming conta-
minated by escaping lubricant.
2. Layout and items supplied
2.1 Layout (Fig. 1)
1. Handle
2. Universal hose connection
3. Intake cage
4. Floating switch
2.2 Items supplied
Please check that the article is complete as spe-
cifi ed in the scope of delivery. If parts are missing,
please contact our service center or the nearest
branch of the DIY store where you made your
purchase at the latest within 5 work days after
purchasing the article and upon presentation of
a valid bill of purchase. Also, refer to the warranty
table in the warranty provisions at the end of the
operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
Anl_GC_DP_3730_SPK7.indb 5Anl_GC_DP_3730_SPK7.indb 5 12.02.2019 09:58:4112.02.2019 09:58:41

EINHELL GC-DP 3730 Specifications

General

Type	Velocity pump
Proper use	Drainage, Water purification
Product color	Black, Red
Assembly required	No
Suitable for indoor use	-
Suitable for outdoor use	Yes
Flow rate	9000 l/h
Grain size	30 mm
Maximum suction height	5 m
Maximum operating pressure	- bar
Maximum input water temperature	35 °C
AC input voltage	230 V
Power cable type	H05RN-F
Power source type	AC
AC input frequency	50 Hz
Package weight	5150 g
Quantity per pack	1 pc(s)
Cable length	10 m

Weight and Dimensions

Depth	220 mm
Width	180 mm
Height	400 mm
Weight	4300 g