EasyManuals Logo

EINHELL GC-DP 3730 User Manual

EINHELL GC-DP 3730
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
GB
- 8 -
8. Cleaning, maintenance and
ordering of spare parts
Unplug the power plug prior to any maintenance
work.
8.1 Cleaning
For mobile applications, the equipment
should be cleaned with clear water after every
usage.
For stationary installation, it is recommended
that you check the floating switch for proper
functioning every three months.
Use a water jet to remove any lint or fibrous
particles that may have become trapped in
the housing.
Remove sludge from the shaft bottom and
clean the shaft walls every 3 months.
Use clear water to remove deposits from the
floating switch.
8.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
9. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council o ces.
10. Storage
Store the equipment and accessories out of
children’s reach in a dark and dry place at above
freezing temperature. The ideal storage tempe-
rature is between 5 and 30 °C. Store the electric
tool in its original packaging.
Anl_GC_DP_3730_SPK7.indb 8Anl_GC_DP_3730_SPK7.indb 8 12.02.2019 09:58:4112.02.2019 09:58:41

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EINHELL GC-DP 3730 and is the answer not in the manual?

EINHELL GC-DP 3730 Specifications

General IconGeneral
TypeVelocity pump
Proper useDrainage, Water purification
Product colorBlack, Red
Assembly requiredNo
Suitable for indoor use-
Suitable for outdoor useYes
Flow rate9000 l/h
Grain size30 mm
Maximum suction height5 m
Maximum operating pressure- bar
Maximum input water temperature35 °C
AC input voltage230 V
Power cable typeH05RN-F
Power source typeAC
AC input frequency50 Hz
Package weight5150 g
Quantity per pack1 pc(s)
Cable length10 m
Weight and Dimensions IconWeight and Dimensions
Depth220 mm
Width180 mm
Height400 mm
Weight4300 g

Related product manuals