Do Not Disturb is a function which when activated gives busy tone to all incoming calls. The
exceptions to this are calls from extensions that have DND Override set in system programming.This
function can be programmed into a programmable keys as described in section 4.3.9.
• Press the <Menu> key when the System
Phone is idle
• Select Call Diversion
• Use the
keys to scroll through the
options
• Press the <Select> key when the Divert
On Busy option is reached
The current setting will be ticked.
By default Divert On Busy is disabled.
To enable -
• Use the
key to move the cursor
• Press the <Select> key to enable
• Use the
keys to select the destination
option
• Press the <Select> key to set
Divert On Busy allows calls to be diverted to -
- Another extension
- Voicemail
Divert On Busy is now set. Any internal or external calls arriving at the extension while it is busy on
another call will be diverted to the selected number.
To cancel the diversion –
• Press the <Menu> key when the executive system phone is idle
• Select Call Diversion
• Select the Divert On Busy option
• Select the Disabled setting
To return to the idle display simply press <Back> twice and then <Exit>.
-
• Press the DND key. The LED on the
key will be lit and the display will show
Do Not Disturb on the third line
To clear DND -
• Press the DND key. The LED on the
key will be extinguished and DND will
be cleared