Eizo ColorEdge CG319X - Controls and Functions; Front

8
Chapter 1
Introduction
1-2. Controls and Functions
●
Front
1
432
1. Built-in calibration sensor Executes calibration for monitors. (SelfCalibration function)
2. Ambient light sensor Measures ambient light.
3. Operation switches Displays menus. Operate the switches according to the operation
guide.
Touch the switch to display its menu.
The switch indicators are lit white when you turn on the power.
4. Power switch Turns the power on or off.
Touch the switch to turn the power on.
The switch indicator is lit when you turn the power on. The indicator
color differs depending on the monitor's operation status.
White : Operating mode
Orange : Power saving mode
OFF : Power off
*1 See “5-1. Basic Operation of the Setting Menu” (page 22) for more information about how to use the
Setting menu.
Setting menu
*1