How to fix blurred characters on Eizo DuraVision FDX1001T?
If characters appear blurred on your Eizo monitor, it may be due to a non-complying high-resolution signal being input. Check your PC settings and adjust the resolution to one that is compatible with the monitor.
Eizo DuraVision FDX1001T Monitor power light is on but no display. What to do?
If your Eizo monitor's power indicator lights blue but there's no picture, first ensure that the connected device is powered on. If it is, try switching the input signal. You may also need to increase the [Brightness] and [Contrast] settings.
Why doesn't the Event Selector work on my Eizo DuraVision FDX1001T Monitor?
When 'Drag then click' is set in the [Click Mode] menu of the [UPDD Console] window, the Event Selector on your Eizo Monitor will not function.
How to adjust brightness on Eizo DuraVision FDX1001T Monitor?
If your Eizo monitor screen is too bright or too dark, adjust the brightness or contrast settings using the [Brightness] or [Contrast] controls.
How to remove interference patterns from Eizo Monitor?
If you see interference patterns or pressure marks on the screen of your Eizo Monitor, leaving the monitor displaying a white or black screen may resolve the issue.
What to do if the Eizo DuraVision FDX1001T Monitor power light is blue but there's no display?
If the power indicator on your Eizo Monitor lights blue but there is no picture, check that the connected device is powered on, switch the input signal, and increase the [Brightness] and [Contrast] settings.
Why does the cursor jump on my Eizo Monitor?
If the cursor position is incorrect or jumps on your Eizo Monitor, try turning the monitor off and on again. If the issue persists, perform a calibration on the monitor, and ensure you are only touching the screen with one finger.
How to fix vertical bars on my Eizo DuraVision FDX1001T screen?
If vertical bars appear on the screen or a part of the image is flickering on your Eizo Monitor, try adjusting the settings using the [Clock] function.
What to do if my Eizo DuraVision FDX1001T screen is flickering or blurring?
If your Eizo Monitor screen is flickering or blurring, try adjusting the settings using the [Phase] function.
Why are the characters blurred on my Eizo DuraVision FDX1001T Monitor?
If the Eizo Monitor displays characters that appear blurred, ensure that your PC settings are configured to a resolution that is compatible with the monitor's specifications.
General| Contrast Ratio | 1000:1 |
|---|---|
| Touchscreen | Yes |
| Power Supply | AC 100-240 V, 50/60 Hz |
| VESA Mount | Yes (75 x 75 mm) |
| Resolution | 1280 x 800 |
| Input Ports | DVI-D |
| Touch Technology | Projected Capacitive |
| Input Signals | Digital |
| Response Time | 25 ms |
| Operating Temperature | 0 - 40 °C |
| Storage Temperature | -20°C to 60°C |
| Durability | IP65 |
To Next Page