9
Chapter 1 Introduction
Chapter 1 Introduction
Thank you very much for choosing an EIZO color LCD monitor.
1-1. Features
FDX1001T/FDV1001T: 10.4-inch screen, FDX1201T: 12.1-inch screen
Resolution
- FDX1001T/FDX1201T: XGA (1024 × 768) display compliant
- FDV1001T: VGA (640 × 480) display compliant
Maximum brightness
FDX1001T: 460 cd/m
2
, FDV1001T: 350 cd/m
2
, FDX1201T: 780 cd/m
2
LED backlight LCD panel
The LED backlight provides better power efficiency and reduced power consumption compared to existing
uorescent backlight LCD panels.
No mercury, a hazardous substance, is used.
Analog signal support
PC signal: D-Sub mini 15 pin connector × 1
- FDX1001T/FDX1201T: Horizontal scanning frequency 24 kHz - 50 kHz
Vertical scanning frequency 55 Hz - 75 Hz
- FDV1001T: Horizontal scanning frequency 24 kHz - 32 kHz
Vertical scanning frequency 56 Hz - 70.5 Hz
Video signal: S-Video/ Video input connector × 1
- Applicable Format NTSC, PAL, SECAM
Resistive technology touch panel function
Enables touch operation of the PC screen.
Crosshair display function
Displays lines (Fine, Circle or Broken Line) as a reference for the position of the image displayed on the monitor.
3-3. Congure other settings (page 18)
Video aspect function
Alters the display range of the input image (overscan). 3-3. Congure other settings (page 18)
1-2. Package Contents
Check that all the following items are included in the packaging box. If any items are missing or damaged,
contact your local dealer.
NOTE
Please retain the packing materials for future transport of the monitor.
Please refer to the touch panel driver installation guide on the CD-ROM when installing the touch panel driver.
•
•
LCD Monitor
AC Adapter
Cable Tie
User’s Manual (Limited Warranty included)
EIZO Touch Panel Disk (CD-ROM)
-Touch Panel Driver
-User’s Manual for Touch Panel Driver (PDF le)
RS-232C Cable
ATTENTION
This product does not include a power cord. Please provide separately a power cord which meets the usage
requirements.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•