11
Chapter 2 Connecting Cables
Chapter 2 Connecting Cables
2-1. Connection Procedures
1
Connects to external equipment compatible with the monitor.
・
When used as a PC monitor
･････････････････････････
page 11
・
When using video equipment
････････････････････････
page 12
● When used as a PC monitor
ATTENTION
When replacing the current monitor with an FDX1001T / FDV1001T /FDX1201T monitor, be sure to change the
PC settings for resolution and vertical frequency to those which are available for the FDX1001T / FDV1001T/
FDX1201T monitor referring to the resolution table (see below) before connecting the PC.
•
Compatible Resolutions/Frequencies
The monitor supports the following resolutions.
・
FDX1001T/FDX1201T
Resolution Display Mode Frequency Dot Clock
640 × 400 NEC PC-9801 56 Hz
~
65 MHz
640 × 400 NEC PC-9821 AP2 70 Hz
640 × 480 Apple Macintosh 67 Hz
640 × 480 VGA, VESA
~
75 Hz
720 × 400 VGA TEXT 70 Hz
800 × 600 VESA
~
75 Hz
832 × 624 Apple Macintosh 75 Hz
1024 × 768
*1
VESA 60 Hz
*1
Recommended resolution (Set this resolution.)
・
FDV1001T
Resolution Display Mode Frequency Dot Clock
640 × 480 Apple Macintosh 67 Hz
~
31 MHz
640 × 480 VGA 60 Hz
To Next Page
Loading...
Need help?
General