Ejoin ACOM516 - SIM Num Settings

ACOM516 User Manual
Shenzhen Ejoin Technology Co.,Ltd. 26
The callee will select a SMS content first, then send to caller before inter
calling, you can click “Add New” button to add new SMS content and delete
or edit the SMS content.
3.4.9 SIM Num Settings
You should set the SIM number first before enable the inter port
calling/SMS-sending. You can get SIM number by USSD or SMS automatically.
Figure 3.4.9-1 USSD Auto-Get LocNum Settings
Items
Description
Auto-Get LocNum
When choose USSD, the gateway will get the SIM number by
USSD
USSD Command
The USSD command for querying SIM number.
Number Keywords
The prefix keywords of the SIM number in USSD response. For
example: the USSD response is your SIM number 923345556978,
then keyword is number, it is usually the word before SIM
number.
Prefix Translation
If you get the number is 923345556978, but you don’t need a
country code, you can do prefix translation, delete 923 then add 0.
Table 3.4.9-1
The page below shows the setting of getting number by SMS, it is same as
USSD, you should send the SMS content to the operator to get the SIM number.