Ejoin ACOM516 - 3.4.13 Call Dur. Control

ACOM516 User Manual
Shenzhen Ejoin Technology Co.,Ltd. 32
3.4.13 Call Dur. Control
Call duration control is for users to control the SIM using time. And the data
will not flush even you restart the device or pull off the SIM.
Figure 3.4.13-1 Call Duration Settings
Items
Description
Use Global Settings
Enable: all channels use same call duration limitation.
Disable: you can set different call duration limitation for single
channel.
Total Max Duration
The value of limitation. After the call duration excesses this value, the
SIM will be locked by device. 0 means no limit.
Daily Max Duration
The value of limitation. After the daily call duration excesses this
value, the SIM will be locked by device. 0 means no limit.
Min Duration Unit
Operator charging time, when the call is over this time, operator will
collect fees. For example: china mobile charge per minute, the min
duration unit will be 60 seconds.
Drop Call If Expired
Enabled: calls will be dropped after the SIM excesses call duration
time.
Disabled: calls will not drop.
Table 3.4.13-1
You can scan more details about the call duration control on the page below.
Once the SIM is used up, it will be locked by gateway. If you still want to use it,
you need to click “Reset”.