22
(set) : settings for data transfer, see instructions
page 23-25.
(set) : the speaker volume can be selected
using the scroll wheel as described above.
The signal intensity is indicated by the speaker
symbol being full with three hemispheres (loud),
full with one hemisphere (medium) or empty
(muted)
(set) (CTRL D+S): settings for performing a
functionality test, see instructions page 26-27
(mem): to view stored test results the memory
submenu must be activated. The last result is
displayed together with the storage position
number and if available with the step test data
achieved during the test. The storage position
number is showed intermittent with the date and
time of the test result. The memory can hold up
to 250 test results. If more values are recorded
the oldest value will be overwritten rst.
Settings
To Next Page
Loading...