27
For test solutions of 10 mmol/L the result is
evaluated by the device:
“OK”: the test result is within the specied
limits, see label of the test solution bottles. If the
test result is outside the specied range a plug
connector test is started automatically and an
error message “Er3” or “Er4” is displayed (see
error messages).
Test solutions can only be measured in dSC
mode. Any measurement of test solution in the
regular test mode will give wrong results.
Attention: Never hold the opening of the test
solution bottle directly up to the sensor as its
contents will become contaminated and unusable.
Caution: Ingesting or contact of test solution
with the mucous membranes must be avoided.
Keep the test solution away from children-
choking hazard!
To Next Page
Loading...