3
Intended use and safety guidelines
• TheLactateScout+mayonlybeused
with the Lactate Scout sensors to
determine the lactate concentration in
capillary whole blood. The Lactate Scout
sensors are only for single use.
• Onlyforexternalapplicationoutsidethe
body. (In-vitro diagnostic application)
• LactateScout+issuitableforself-testing.
It can also be used by qualied staff in
various medical faculties. Test results
should only be used as guidance in making
decisions for further treatment of patients
following a suitable period of evaluation.
• KeepLactateScout+andaccessoriesoutof
the reach of children (choking hazard due to
small parts).
• Theprincipalriskofinfectionisinthe
handling of blood samples when measuring
lactate concentrations.
•Onlyundamagedandunusedlancets
and sensors may be used. Used sensors,
lancets and cellulose cloths pose a risk of
infection. These must be safely disposed of
as household waste following use.
• Protectiveglovesmustbewornwhen
performing tests on third parties.
• Thesterilesingleuselancetsmayonly
be used to draw capillary blood on the
ngertips or earlobes.
Unpacking
Unpack the system and check that the
following components are present and
undamaged in the pack. If there is anything
missing contact customer support.
Lactate Scout+ Analyzer / 1,5V AAA/LR03 batteries (2x)
User manual