ELAD FDM-DUO - Page 95

ELAD FDM-DUO User Manual - Rev. 2.3 - 06/2016
© 2016 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
95
Flash Magic will now proceed to program the
firmware.
Then, Flash Magic performs the programming
verification.
Wait until the end of the process, it should result like the picture bellow.
Then turn off and on the FDM-DUO.
If some problems occur during the firmware update procedure, please contact the ELAD technical
assistance.