elco VGL 06.1600 DP User Manual

06/2011 - Art. Nr. 13 018 118C
VGL 06.1200 DP
(Ausführung Belgien/ Belgian version )
VGL 06.1600 DP
VGL 06.2100 DP
Betriebsanleitung
Für die autorisierte Fachkraft
Öl/Gas- Zweistoffbrenner ...................2-24
DE
EN
Ersatzteilliste
Spare parts list
Pièces de rechange
Wisselstukkenlijst....................13 018 120
Elektro- und Hydraulikschema
Electric and hydraulic diagrams
Schémas électrique et hydraulique
Elektrische en hydraulische schema 13 021 656
Operating instructions
For the authorized specialist
Fuel-oil/Gas dual fuel burners.........25-47

elco VGL 06.1600 DP Specifications

General

Brand	elco
Model	VGL 06.1600 DP
Category	Burner
Language	English

Summary

Operating Instructions and System Diagrams

Operating Instructions for Fuel-oil/Gas Dual Fuel Burners

Provides operational guidance for authorized specialists on dual fuel burners.

Overview and System Components

Important Safety and Installation Instructions

Covers compliance with standards, installation, and maintenance safety.

Gas Valve Selection Guide

MBVEF and VGD Gas Valve Selection

Guides selection of MBVEF and VGD gas valves based on burner power and gas type.

Oil Supply System Installation

Oil Supply Specifications and Connections

Details oil supply requirements, flow rates, pump pressure, and connections.

Combustion Control Unit LFL 1.333

LFL 1.333 Function Description and Timing

Details the functions and timing sequences of the LFL 1.333 combustion control unit.

Gas Valve Assembly and Leak Testing

Gas Valve Assembly and Connections

Guides the assembly of gas valves (VGD/MBVEF) and their connections.

Gas Nozzle Settings for Different Fuels

Natural Gas Nozzle Configuration

Describes the default and recommended settings for natural gas nozzles.

Propane Gas Nozzle Configuration

Describes the default and recommended settings for propane gas nozzles.

Oil Supply System Requirements

Oil Supply Installation and Regulations

Covers oil supply installation, regulations, and hose connections.

Pre-start-up Checks for Oil and Gas

Air Regulation and Servomotor Settings

Servomotor and Cam Setting for Air Flap

Explains the servomotor and cam settings for air flap adjustment.

Choosing the Power Control Type

Two-Stage Power Control Options

Describes two-stage regulating options for ignition and part-load/full-load control.

Three-Stage Power Control Option

Details the three-stage regulating option for ignition, medium-high, and full-load control.

Regulation for Oil Operation

Bleeding the Oil Pump and Setting Pressures

Covers bleeding the oil pump and setting oil pressures for operation.

Regulating Gas Operation

Setting Gas Pressure and Air Switches

Setting Ignition Load and Gas/Air Ratio

Component Maintenance and Replacement

Blast Tube Removal and Cleaning

Troubleshooting Gas Operation Faults

Gas Faults: Burner Idle or No Start

Addresses issues like burner idle, no start, and motor not starting.

Gas Faults: Ignition and Valve Issues

Troubleshooting Oil Operation Faults

Oil Faults: Burner Idle or Motor Issues

Addresses burner idle, motor start issues, and protection device faults.

Oil Faults: Ignition and Valve Operation