C
Colleen AlvaradoAug 7, 2025
What to do if elco Burner blower motor does not start?
- MMark BurgessAug 7, 2025
If the blower motor on your elco Burner doesn't start, there could be several reasons. First, a protection device might have opened, in which case you should unlock, adjust, or replace the protection switch. Alternatively, the blower motor itself might be defective, requiring you to replace the protection device. Other potential causes include faulty cable connections (check these), magnetic valves not opening (replace the motor), or a jammed valve preventing fuel from reaching the burner (replace the valves).