12
value remains stable (the trend indicator [ ] between the parameter and the reading indicates if
the value is increasing [ ] or decreasing [ ]).
5. If you want to freeze the measurements on the display, scroll to Hold and then
press OK.
The Hold option changes to Store.
6. To save the current log record, with Store highlighted, press OK.
To cancel the current log record and prevent it being stored, scroll to Cancel and
then press OK.
Each log record contains the following measurements:
Relative humidity, ambient temperature, surface temperature, dewpoint
temperature, Delta-T, and the time and date. Check the measurement visually
before storing it.
7. Repeat steps 5 and 6 to save more log records.
8. To stop manual logging and return to the BATCH menu, scroll to Back and then
press OK.
RH 72,0 %
Ts 23,2 C
Ta 24,0
Td 18,6
O
O
O
C
C
To Next Page
Loading...
