R
26
Note: If a reading exceeds limits during measurement, it will be shown flashing on the display, even if it has
been deselected from the list of reading shown on the display.
Manual Logging [T]: Select how readings are saved when taking readings manually (manual logging).
The Manual Logging menu is displayed.
To select immediate saving of a reading, scroll to Save Only and then press Sel.
To select holding of a reading followed by an option to save, scroll to Hold & Save and then press Sel.
When finished, press Back.
Softkeys Locked [T]: Toggles locking of the softkeys on/off.
Softkeys Locked adds an additional level of security to prevent accidental stopping of interval logging. When
Softkeys Locked is ‘on’ an extra key press is required to stop interval logging. To stop interval logging:
• Softkeys Locked ‘Off’: Press Stop>Yes (within 2 seconds)
• Softkeys Locked ‘On’: Press Stop>Unlock (within 2 seconds)>Yes (within 2 seconds)
User Screen: Toggles display of the user screen on/off.
See “Personalised user screen” on page 30
Setup Backlight: Select backlight brightness and backlight timeout.
The Setup Backlight menu is displayed.
To toggle the display backlight on/off, scroll to Backlight and press Sel.
To adjust the backlight timeout, scroll to Backlight Timeout and press Sel. Scroll to the timeout required
(0 s [off] to 60 s) and press Ok.
To Next Page
Loading...
