www.elcometer.com
en-9
R
1 Press until is displayed followed by to select.UNITS
9.3 SELECTING THE UNITS
3 Press to select the setting required.
9.5 RESETTING THE GAUGE
1 Press until is displayed followed by to select.TIMER
2 Press or to toggle between the options; , 1 ,
5 , 20 .
NONE MIN
MIN MIN
3 Press to select the units required.
9.4 SETTING THE DOLLY SIZE
1 Press until is displayed followed by to select.DOLLY
2 Press or to toggle between the options; 20 , 14.2 ,
50 .
MM MM
MM
2 Press again to confirm the reset. The gauge will reset and
switch off.
3 To cancel the reset request, press or to toggle to
‘CANCL’ followed by to confirm.
3 Press to select the setting required.
The gauge has a gauge reset function which restores the original
factory settings.
The gauge can display readings in a (Megapascals) or
(Pounds per Square Inch).
MP PSI
1 Press until RESET is displayed followed by to select.
AUTOMATIC SWITCH OFF: The gauge has a timer function and can
be set to switch off automatically after 1, 5 or 20 minutes of inactivity.
The gauge default setting is .NONE
2 Press or to toggle between and .MPA PSI
MENU
MAX
MENU
MAX
MENU
MENU
MAX
MENU
MENU
9 DIGITAL PRESSURE GAUGE FEATURES & FUNCTIONS (cont)
MENU
MAX
MENU
To Next Page
Loading...
