Elcometer 506 - English; Table of Contents

Section Page
1
Gauge Overview
en-2
2
Box Contents
en-3
3
Securing the Dolly
en-3
4
Preparing the Gauge for Test
en-4
5
Attaching the Gauge to the Dolly
en-5
6
Performing the Test
en-6
7
Assessing the Results (Destructive Testing)
en-7
8
After Test
en-8
9
Digital Pressure Gauge Features & Functions
en-8
10
Verifying the Gauge Calibration
en-10
11
Spares & Accessories
en-10
12
Adhesives
en-12
13
Warranty Statement
en-13
14
Technical Specification
en-13
15
Legal Notices & Regulatory Information
en-14
Note: The pressure gauge supplied with the Elcometer 506 Digital Adhesion Tester is intended for use
only as an integral part of the instrument and should not be removed by the user and used
elsewhere.
Gauge Dimensions: Instrument Length: 290mm (11.5")
© Elcometer Limited 2012 - 2023. All rights reserved. No part of this document may be reproduced, transmitted,
transcribed, stored (in a retrieval system or otherwise) or translated into any language, in any form or by any
means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior written permission of
Elcometer Limited.
Gauge Weight: With 14.2mm & 20mm Standard Dolly Skirt: 1.8kgs (4lbs);
With 50mm Standard Dolly Skirt: 2.0kgs (4.4lbs)
For the avoidance of doubt, please refer to the original English language version.
CONTENTS
www.elcometer.com
en-1
R