ELECRAFT KRX3 - KRX3 A Hardware Bag E850334

8
ILLUSTRATION DESCRIPTION QTY.
ELECRAFT
PART NO.
KNB3 SUBIN Board
ESD Sensitive.
1 E850331
KNB3 SUBOUT Board 1 E850332
KRX3A Enclosure, Top (with tall
standoffs)
1 E100334
KRX3A Enclosure, Bottom (with short
standoffs)
1 E100334
KRX3A Hardware Bag E850334
ILLUSTRATION DESCRIPTION QTY.
ELECRAFT
PART NO.
TMP Cable 5” (13 cm) 2 E100282
TMP Cable 10” (25 cm) 2 E850338
TMP Cable 12” (30 cm) 1 E850339
Circular Foam Pad (Self-Adhesive: Do not
remove protective backing until instructed to
do so)
1 E700053
Battery Cover 1 E100343
Resistor, 27 ohm (red-violet-black)
1/8 watt
1 E500336
Typical Standoffs
(May be round or hexagonal)
Standoff, Metal, 4-40 7/8” (22 mm) 2 E700156
Standoff, Metal, 4-40, 1/2” (13 mm) 2 E700061
Standoff, Metal, 4-40, 3/8” (9.5 mm) 2 E700153
Standoff, Metal, 4-40, 1/4” (6.4 mm) 4 E700152
Standoff, Nylon, 5/8” (15.9 mm) 1 E700163