Electrical Safety Precautions:
Before beginning any machine repair, make sure you know where and how to turn off the electricity to the
appliance. Know the locations of any plugs, fuses, circuit breakers, and cartridge fuses in your home or
workshop. Be sure to label them.
If in servicing your appliance, a voltage test is required, reconnect the power supply only for the duration of
the voltage test. Disconnect the power immediately following the test. When conducting a voltage test, make
sure that no other conductive parts come into contact with any exposed current-carrying metal parts.
When you replace any parts, or are putting the machine back together, always reinstall the wires to the
correct terminals as per the wiring diagram. Inspect the wires closely to make sure they are not crossing any
sharp areas, are pinched in any way, caught between panels, or in between any moving parts that can
cause an electrical malfunction.
It is also important to keep these safety tips in mind:
Make sure that your machine has its own grounded electrical circuit.
Never use an extension cord to plug in your appliance.
Ensure the electricity has been turned off before servicing the machine.
Do not remove the ground wire from a three-prong power cord, or any other ground wires from the
machine.
Do not perform any alterations to any machine switches, components, or features.
Before repairing the machine, replace any damaged, pinched, or frayed wires.
Make sure all electrical connections within the unit are correctly and securely connected.
Moisture Protection Ordinary. This Product is not suitable for out door use.
Shock Protection Class 1.
This apparatus should always be earthed.
Machine Safety Precautions:
Always call a machine repair technician if you doubt the safety of your machine.
When replacing any part that is not working correctly or that may have blown, use only replacement parts of
the same size specifications and capacity as your original part. Consult a machine repair technician if you
have any questions or concerns.
Operating Safety Precautions:
Once you have repaired your machine, do not operate it again until it has been properly reinstalled
according to the manual's use and care instructions, and according to the manufacturer's instructions.
Also, follow these additional safety tips to prevent injuries:
Do not permit children to play on or operate your machine.
Do not permit persons who are unfamiliar with the proper operation of your machine to operate it.
Use your machine only to complete the tasks they were designed to complete.
Instruction Manual for EB2500 (S5321)
To Next Page
Loading...