7. Safety Features
7.1. Babycare Function
The Baby care function limits the maximum surface temperature below 60
o
C.
IMPORTANT NOTE: Please read the safety standards on page 4 and 5. This is NOT a
LST (L ow Surface T emperature) radiator as dened in NHS guidelines.
This feature decreases the maximum heating power in order to have a surface
temperature below 60°C approximately. So the time to heat a room can be longer.
When this function is enabled, the baby icon (
) is displayed and blinks if the power is
effectively reduced.
Important note: when baby care function is enabled, the reaction time of the radiator
can take up to 1 minute when the desired temperature is changed by pressing PLUS or
MINUS.
This function is not
activated by default and
can be enabled with
long press on
MINUS
and MODE button in all
modes except in OFF or
setting functions.
LONG PRESS 2s
to enable/disable
Babycare function
7.2 Keypad L ock
The radiator is equipped with the option to lock the keypad.
This option is useful to prevent unwanted change in
settings (children, public buildings, offices, etc…)
To lock: long press (>3s) simultaneously on the
buttons
+
and
-
.
The screen displays for 2s all the horizontal bars
when a button is pressed and the keyboard lock is
enabled.
To unlock: long press (>3s) simultaneously on the
buttons “
+
” and “
-
” again.
Note: the locking of the keypad is also possible with the remote
control.
To Next Page
Loading...