Electric Radiator Solutions Prisma+ - 2 Pairing Your Radiator with the Ivista App

2. Pairing your radiator with the iVISTA app
NB: please notice that this is only available for the models CURVO+iVISTA and
PRISMA+iVISTA
1) Install the heater and your MiniBox i-Vista. See each user manual of i-Vista MiniBox.
2) Set the thermostat in STOP/Standby mode by pressing On/Off button => The
thermostat goes in STOP/Standby mode showing current time or --:-- if time is
unknown.
3) Enter in setting configuration mode by pressing
MODE button for 2 seconds
4) Start wireless pairing on thermostat by pressing
“+” button. You can cancel paring with MODE or OFF
button.
5) Add a new device on smartphone advanced
settings menu to automatically discover your mobile
device. This process can take up to 8 minutes. Please
do not cancel any of the process of the pairing will
fail.
5) If the heater is well paired with the iVISTA app, the
word “Yes” will appear on the LCD screen and you
can now use your smart phone or tablet to control
the thermostat. If the word “no” appears on the LCD
screen, then check the status of the MiniBox and
your internet connexion and start again pairing on
step 2)
6) Quit pairing menu with STOP button
9