Electric Radiator Solutions Prisma+ - 9 Restore Factory Settings

9. Reset Factory Settings
This function erases all the setting of the thermostat for starting a new configuration.
ACTION
SCREEN
a. Go to STOP/STANDBY position
Screen --:-- or hour : minutes
b. Long press an release (mini 10s) on
MODE and STOP
c. Long press again (mini 5s) on MODE and
STOP button to reset the all the parameters
note : you can press 0.5s on STOP button to
cancel the reset.
After Reset, the programmer returns in COM-
FORT mode
BACKLIGHT FLASHING
20