Electro-Voice ELX200-18SP-AP - Page 12

Subwoofer
Models: ELX200-12SP and ELX200-18SP
To set up a subwoofer, do the following:
Step Illustration
1. Connect the AC power cord from a
grounded line receptacle to the MAINS
IN.
MAINS IN
2. Connect the XLR or TRS cable from an
audio source to INPUT 1 or INPUT 2.
MASTER VOL
INPUT 1
INPUT 2
OUTPUT 1
OUTPUT 2
PUSH F OR DSP
QuickSmartDSP MONITOR|
3. Switch POWER to ON.
4. Adjust the MASTER VOL knob to the
desired volume.
MASTER VOL
PUSH FOR D SP
ELX200 Powered Loudspeakers
2017.06 | 01 | F.01U.326.891 Installation manual Electro-Voice