Electro-Voice ELX200-18SP-AP - Using Full-Range Systems as Monitors

Using full-range systems as monitors
LINE and MIC input level control is available for both INPUT 1 and INPUT 2. The 12 o’clock
position is unity gain (no gain or attenuation) and the range to the right of zero (0) is for
adjusting microphone levels.
RL
QuickSmartDSP MONITOR|
AUX IN
OUTPUT
MASTER VOL
INPUT 1
INPUT 2
PUSH FOR D SP
ELX200
RL
QuickSmartDSP MONITOR|
AUX IN
OUTPUT
MASTER VOL
INPUT 1
INPUT 2
PUSH FOR D SP
ELX200
Notice!
The direction of the arrow indicates the signal path.
Mode: Live
Location: Monitor
Sub: Off
Table 7.4: DSP settings loudspeakers as monitors
See also
• Amplifier DSP controls, page 19
• Full-Range loudspeaker DSP control menu, page 22
7.4
ELX200 Powered Loudspeakers
2017.06 | 01 | F.01U.326.891 Installation manual Electro-Voice