Floor monitor
ELX200-10P, ELX200-12P, and ELX200-15P loudspeakers may be used as a floor monitor by
placing the loudspeaker on the integral monitor angle.
To set up a loudspeaker as a floor monitor, do the following:
1. Place the loudspeaker on a level and stable surface.
2. Safely route cables to prevent injury to performers, production crew, and audience
members.
Notice!
Secure cables with wire ties or tape whenever possible.
90°
50°
60°
OPTIMAL
COVERAGE
OPTIMAL
COVERAGE
Figure 3.2: Optimum coverage in monitor position (side view left and front view right)
See also
• Full-Range loudspeaker DSP control menu, page 22
3.2
en 15
Electro-Voice Installation manual 2017.06 | 01 | F.01U.326.891
To Next Page
Loading...
