Electro-Voice EVERSE Series - Amplifier DSP; Amplifier Controls and Interface

26 en | Amplifier DSP EVERSE Battery-powered Loudspeaker
2023-12 | 02 |
User manual
Electro-Voice
5 Amplifier DSP
5.1 Amplifier DSP controls
The amplifier has a combination of controls and connectors to ensure the most versatile
loudspeaker system.
Loudspeaker control and monitoring interface
These DSP control menu selections are available for the EVERSE .
12
1
3
4
5
7
8
6
9
10
11
2
Figure5.1: Loudspeaker amplifier panel
1. LCD – DSP control and monitoring interface.
2. MASTER VOL - Adjusts the sound level and navigates the DSP control menu.
DSP - Scroll through the menu and select the available choices. Push the MASTER VOL
knob to enter the DSP control menu.
3. Input selection soft keys - Press the soft key to select the input and access the DSP
control menu for the channel. Press the softkey a second time to deselect the channel
and return to the main DSP.
4. INPUT 1 - Balanced INPUT for the connection of signal sources like mixing consoles,
instruments, or microphones. Connections can be established using ¼-inch TRS or XLR
connectors. The XLR connector is selectable for 48V phantom power.
5. INPUT 2 - Balanced INPUT for the connection of input sources like mixing consoles, or
microphones via XLR connector or Hi-Z instrument connection via TRS.
6. INPUT 3/4 - Bluetooth® stereo INPUT for audio streaming or analog stereo INPUT via
3.5mm mini-jack.