Electro-Voice EVERSE Series - Page 34

34 en | Amplifier DSP EVERSE Battery-powered Loudspeaker
2023-12 | 02 |
User manual
Electro-Voice
LIMIT
DISPLAY BACK
DIM ON (Default)
OFF
BRIGHT 5 (Default)
1 - 10
CONTRAST 5 (Default)
1 - 10
BACK
STORE BACK, 1, 2, 3, 4, 5,
BACK
RECALL BACK, 1, 2, 3, 4, 5, 6
(Default), BACK
STANDBY 15min (Default)
15min - 60min, OFF
RESET DEFAULT SETTINGS? NO (Default)
YES
ERASE USER
PRESETS?
NO (Default)
YES
INFO [FIRMWARE
VERSION]
©2021 Electro-Voice
EXIT
Table5.2: Loudspeaker DSP control menu BASIC mode
EXIT menu
The EXIT menu is used to return to the home screen.
i
Notice!
The display returns to the home screen after 30seconds of inactivity.
FUNCTION menu
The FUNCTION menu is used to configure between MIXER and BASIC functions:
– BASIC - provides input and output gain controls, 3-band EQ, and system delay for
simplified audio setups or used as satellite or R-channel stereo setup.
– MIXER - provides full access and control of the mixer.
MODE menu
The MODE menu is used to configure the type of sound the loudspeaker delivers.