Step 6 Select S3.
Duration: 1 h 40 min
Step 7 When the function ends, empty the deep pan.
When this function works, the lamp is off.
When descaling ends:
Turn off the oven. When the oven is cold,
dry the cavity with a soft
cloth.
Leave the oven door
open and wait until the
cavity is dry.
Turn on the function: Rinsing.
Refer to Care and Cleaning
chapter, "How to use: Rinsing -
S4".
If some limestone residue remains in the oven after descaling, the display prompts to repeat the procedure.
12.8 Descaling reminder
There are two reminders which prompt you to descale the oven. You cannot disable the
descaling reminder.
Type Description
Soft reminder Recommends you to descale the oven.
Hard reminder Obligates you to descale the oven. If you do not descale the oven when the hard
reminder is on, the steam functions are disabled.
When the reminders are active S3 flashes on the display. These reminders activate each time you turn off the
oven.
12.9 How to use: Rinsing - S4
Before you start:
Turn off the oven and wait until it is cold. Remove all accessories.
Step 1 Turn on the oven.
Step 2 Place the deep pan on the first shelf position.
Step 3 Fill the water drawer with water to the maximum level until the signal sounds or the display shows
the message.
Step 4
- press repeatedly until the display shows S1.
Step 5 Select S4.
Duration: 30 min
Step 6 When the function ends, remove the deep pan.
When this function works, the lamp is off.
When rinsing ends:
Turn off the oven and wait until it is cold. Leave the oven door open and wait until the cavity is dry.
44 ENGLISH
To Next Page
Loading...
