12.5 How to use: Steam Cleaning - S2
Before steam cleaning:
Turn off the oven and wait until it is
cold.
Remove all accessories. Clean the bottom of the cavity and
the inner door glass with a soft cloth
with warm water and a mild deter‐
gent.
Step 1 Turn on the oven.
Step 2 Fill the water drawer to the maximum level until the signal sounds or the display shows the mes‐
sage.
Step 3
- press repeatedly until the display shows S1.
Step 4 Select S2.
Duration: 30 min
When the cleaning ends the signal sounds.
Step 5 Press any symbol to turn off the signal.
When this function works, the lamp is off.
When the cleaning ends:
Turn off the oven. When the oven is cold, dry the cavity
with a soft cloth.
Leave the oven door open and wait
until the cavity is dry.
12.6 Cleaning reminder
When the reminder appears, cleaning is recommended.
Use the function: S2.
You can enable and disable the reminder in the menu: Settings .
12.7 How to use: Descaling - S3
Before you start:
Turn off the oven and wait until it is
cold.
Remove all accessories. Make sure that the water drawer is
empty. If necessary, turn on the func‐
tion: Tank Emptying - S1.
Step 1 Turn on the oven.
Step 2 Place the deep pan on the first shelf position.
Step 3 Pour 250 ml of the descaling agent in the water drawer.
Step 4 Fill the remaining part of the water drawer with water to the maximum level until the signal sounds
or the display shows the message.
Step 5
- press repeatedly until the display shows S1.
ENGLISH 43
To Next Page
Loading...
