Electrolux Hob - Page 38

SOI 04.05 FV 38/57 599 36 62-62
Check for the
main electric
valve.
Main electric valve
faulty.
Replace main
electric valve.
Incorrect operation
of the electric valve.
Check for the
electric valve
relative to the
burner.
Raplace power
board.
Control Result Cause Solution
Condition
1
Incorrect operation
of the electric valve.
Burner electric
valve faulty.
Replace burner
electric valve.
Correct operation of
the electric valve.
Correct operation of
the electric valve.
Power board
faulty.
Error code 2
÷6
(wrong electric
valve back
signal).
Check for the
connections
between the
power board
and the burner
valve.
Faulty contacts on
the connections.
Reset the
connections
correctly.
Incorrect
connections
between power
board and electric
valve
Correct connections
between power
board and electric
valve.
Power board
faulty.
Replace power
board.
Error code 7
(wrong electric
valve back
signal).
Check for the
connections
between the
power board
and the burner
valve.
Faulty contacts on
the connections.
Reset the
connections
correctly.
Incorrect
connections
between power
board and electric
valve.
Correct connections
between power
board and electric
valve.
Power board
faulty.
Replace power
board.
Error code 10
(safety block
after 4 hours)
60 seconds
after the block
switch on the
burner again as
explained in
chapter
“Automatic
burner switch-
off”.
The automatic
burner swtich-off
activated.
Reset the
burner as
explained in
chapter
“Automatic
burner switch-
off”.
The burner
operates normally.