SOI 04.05 FV 29/57 599 36 62-62
5.11 TIMER
The hob features an electronic timer that enables the user to
select a cooking time when the burner is in operation.
Also, it is possible to use the timer – when the hob is not in
operation – as a minute-minder.
The hob can also be operated manually, i.e.
without using the timer.
The timer is inoperative when the hob is disabled.
The symbols on the timer control zone are described below.
Touch control for switching on the timer and
selecting the burner.
Cooking time display
Burner selected
TIMER CONTROL PANEL
Fig. 23
5.10.1 PROGRAMMING THE BURNER SWITCH-OFF TIME
To programme the time at which the burner switches off,
proceed as follows:
1. If necessary, switch on the hob by touching the ON / OFF
touch key for about three seconds.
2. Light the burner by touching the touch control
and
use touch keys
or to adjust the flame setting
(see "LIGHTING THE BURNER")
3. Switch on the timer and select the desired burner by
touching sensor
until the correct burner is displayed.
Fig. 24