SOI 04.05 FV 51/57 599 36 62-62
To remove the power board from the plastic support release the board from its fixing hooks (see Fig. 56).
Fig. 57
1 - SCREWDRIVER
2 - FIXING HOOK
3 - POWER BOARD
4 - PLASTIC SUPPORT
9.4.5 – REPLACEMENT OF BURNERS
To replace a burner:
- Dismount the spark plug and the thermocouple.
- Remove the nozzle.
- Remove the supply pipe – burner fixing nut.
- Remove the 2 burner fixing screws placed on the top lower part (see Fig. 59)
Fig. 58
1 - BURNER
2 - NOZZLE
3 - IGNITION SPARK PLUG
4 - THERMOCOUPLE
5 - GAS SUPPLY PIPE FIXING NUT - BURNER
6 - GAS SUPPLY PIPE
7 - GAS SUPPLY PIPE FIXING NUT - ELECTRIC VALVE
8 - BURNER CONTROL ELECTRIC VALVE
To Next Page
Loading...
