Instructions for use
10
487 18 39 01 - 300/500/750 - GB
Manual operation with RMC (residual moisture control)
Industrial laundry OPL (on-premises-laundry)
A
G H
B
C
E
F Jb a
D
I
A. Filter: When the lamp is lit, the filter must be cleaned.
B. Display indicates program: P1, P2, P3 – or in time
control version: drying time/time remaining
C. Operating lamp.
D. Program selection button/drying-time adjuster.
E. Start/stop button.
F. Temperature selection button.
G. Lamps: lit to indicate selected temperature.
H. Temperature.
I. Gasheated: Push button with light indicator for
resetting gas control
On machine with reversing:
J. Reversing switch: a = With reversing.
b = Without reversing.
Warning
If the gas flame is not ignited
within 10 seconds after starting
the tumble dryer the gas con-
trol will automatically turn off
the gas and report an error.
Push button (I) will be lit.
After 15 seconds it is possible
to reset the error by pushing
the push button (I).
If the situation arises that it is
necessary to reset more than 2
times in a row on the push but-
ton (I) a service technician
must be called in to check the
machine.
To Next Page
Loading...
