Electrolux W475 - Function Options and Identification

57
6639
6
6640
5





 








 

MACHINE PROGRAM PART NO REVISION TYPE HEATING WATER
W455H 3A02 432660002 3.858 SE.A,f EL/DS CH
W455H 3M14 432660003 3.859 SE.C,E EL/DS C
W455H 3H12 432660004 3.858 SE.D,e EL/DS C
7
Function options via program designation
Theparametersoftwareinstalledinamachine’s
programdeviceondeliveryisspeciedon2
plates,onelocatedontheinsideofthedoorand
one by the machine's electrical connection.
Usingthisarticlenumber,youcanndthepro-
gramdesignationandtherebyidentifyI/Omodu-
lefunctionoptionsinoneofthefollowingways:
Option 1.
Accessthesparepartslistunder"ProgramDe-
vice".
The program designation and the I/O module
functionoptionsarespeciedintheremarksco-
lumnfortherelevantparametersoftwarearticle
number.
Option 2.
Openthe"CompassControlLoader–Existing
software"CDandselecttherelevantmachine.
The program designation and the I/O module
functionoptionsarespeciedfortherelevant
parametersoftwarearticlenumber.
FunctionoptionsI/O-1
FunctionoptionsI/O-2
5
FunctionoptionsI/O-1andI/O-2
6
7
I/O modules