EasyManuals Logo

ELEKTRA SPF User Manual

ELEKTRA SPF
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
25
1) Substitute the standard filter mounted on the filter holder of the group with the blind
(non perforated) filter.
2) Insert an ELEKTRA clearing tablet in the blind filter and hook the filter holder on the group.
3) Perform 10 dispensing cycles lasting 20 seconds each.
4) Hook off all the filter holder and do not reconnect it
5) Rinse by dispensing for 30 seconds followed by a 30-second pause and then another
30 seconds of dispensing.
On rinse completion remove the blind filter, place the standard filter back and hook the
filter holder on the dispensing group.
WEEKLY CLEANING OF THE FILTER AND FILTERHOLDER (=)
1) Place three teaspoons of detergent for coffee machines and approx. one litre of boiling
water in a heat-resistant container.
2) Immerse the filters and filterholders in the solution prepared and allow them
to soak for about 20/30 minutes (do not fully immerse filterholders with wood
handles: the water and detergent solution would damage the handles).
3) Rinse thoroughly under running water.
WEEKLY CLEANING OF THE LOWER DRIP TRAY (=)
At least once a week remove the lower cup grille, remove the lower drip tray and clean it,
removing any dregs with the aid of a teaspoon, and then rinse it .
CLEANING OF BODY
Simply use a damp (non abrasive) cloth.
Do not use alcohol or solvents.
4
5
6

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ELEKTRA SPF and is the answer not in the manual?

ELEKTRA SPF Specifications

General IconGeneral
BrandELEKTRA
ModelSPF
CategoryCoffee Maker
LanguageEnglish

Related product manuals