31
TECNICHAL INSTRUCTIONS
THESE INSTRUCTIONS ARE INTENDED FOR
ESPRESSO COFFEE MACHINE
INSTALLATION / MAINTENANCE TECHNICIAN
Packaging is carried out with the aim of protecting the machine from damage during
transportation.
The packaging materials used are recyclable. They are, therefore, chosen according to
environmental protection criteria and ease of disposal, the latter process being geared
at further integration in productive cycle materials.
Thanks to this mechanism, not only is the volume of waste reduced but a more rational use
of non renewable resources is also ensured.
1) Cut the strap that keeps the box closed.
2) Open the top of the box and remove the shock-proof panels inside, remove
the accessories contained inside them and take out the present manual,
keeping these articles to hand for the later phases of use of the appliance.
3) Remove the nylon bag covering the upper part of the machine and put it
in a safe place out of the reach of children .
4) Remove the machine from the box by lifting it upwards.
5) Remove any other packaging materials and protections attached to the machine.
6) Conserve all packaging components for the whole length of the machinery’s
warranty. Any machines sent back during this period without using the original
packaging result in the cancellation of the warranty .
7) After the warranty period, dispose of the packaging through an service provider
that is authorised in the disposal and recycling of these materials .
UNPACKINGA
To Next Page
Loading...
Need help?
General
