Elektro-Automatik PS 9000 T Series User Manual

Page 43
EA Elektro-Automatik GmbH
Helmholtzstr. 31-33 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
ea1974@elektroautomatik.de
PS 9000 T Series
Submenu “IP Settings 2”
Element Description
DNS address Default value: 0.0.0.0
Permanent manual setting of the network address of a domain name server (short: DNS)
which has to be present in order to translate the host name to the device’s IP, so the device
could alternatively access by the host name
Port Default value: 5025
Adjust the socket port here, which belongs to the IP address and serves for TCP/P access
when controlling the device remotely via Ethernet
Submenu “TCP Keep-Alive”
Element Description
Enable TCP Keep-
Alive
Default setting: disabled
Enables/disables the “keep-alive time” functionality of TCP.
Submenu “Logging”
Element Description
Enable USB log-
ging
Default setting: disabled
Enables/disablesthe“logtoUSBstick”feature.Onceenabled,youcandenetheloginterval
(multiple steps, 500 ms ... 5 s) and choose between Start/stop with DC on/off or Manual
start/stop. With a properly formatted USB stick (also see 1.9.5.5) plugged, logging to USB
stick can be used anytime. For more refer to „3.4.8. Recording to USB stick (logging)“.
Submenu “Com Protocols” (communication protocols)
Element Description
SCPI / ModBus Default setting: both enabled
Enables/disables SCPI or ModBus communication protocols for the device. The change is
immediately effective after submitting it with ENTER button. Only one of both can be disabled.
Submenu “Com Timeout” (communication timeout)
Element Description
Timeout USB (ms) Default value: 5
USB/RS232communicationtimeoutinmilliseconds.Denesthemax.timebetweentwo
subsequent bytes or blocks of a transferred message. For more information about the
timeout refer to the external programming documentation “Programming ModBus & SCPI”.
Timeout ETH (s) Default value: 5
Keep-alivetimeoutinseconds.Denesthetimeafterwhichthedevicedisconnectsthe
Ethernet socket automatically due to inactivity.

Elektro-Automatik PS 9000 T Series Specifications

General

Brand	Elektro-Automatik
Model	PS 9000 T Series
Category	Power Supply
Language	English