RW973 MkⅡ User Manual
● Long Beeping After Cutting:
① Disable: there is no sound after cutting
② Use printer buzzer (The beeping time, times and interval time can be set for what you want,
such as 2 milliseconds, 3 milliseconds or 4 milliseconds, etc.):
The following setting is set as an example:
When cutting one piece of paper each time, the printer will emit the “Beep” for one time, and
the beeping time is two milliseconds and beeping interval is three milliseconds.
Note: 100ms=0.1s, 1s=1000ms
● Buzzer Volume:
The “Very Low” is the minimum sound, and the “Loud” the maximum sound. You can select a
volume level and click "Setting" to print (Default: "Standard" level).
To Next Page
Loading...
