Element RW973 Mk2 - Media Loading; Paper Confirmation; Paper Installation

RW973 MkⅡ User Manual
12
4.3 Media Loading
4.3.1 Paper Confirmation
Confirm the type of paper used by the printer before printing. The default paper type is specified
thermal paper.
Choose the paper guide according to the width of the paper roll.
1) Put the finger into the hole in the paper guide, then lift up the paper guide.
2) According to the paper width, insert the paper guide in the proper position.
4.3.2 Paper Installation
1) Turn off printer. Press the cover open button to open the top cover of RW973 Mk
Ⅱ
.
2
）
Remove the used roll paper core, if any.
0
1 -
80

mm
0
1 -
58

mm