ELFON OPTIMA SL255 - 5.3 Default Settings Restoration; 5.3.5 Memory Deletion (RF Tags, Individual Codes)

§ Select Default numeration (confirm with „ ” )
§ Confirm again with „ ”
5.3.2 General default settings
Restores general default settings (leaving those settings, that can be changed by users or only those that
fitter allowed to change),
§ Enter the menu Settings ( code )
§ Select Default settings (confirm with „ ” )
§ Select Default general settings (confirm with „ ” )
§ Confirm again with „ ”
Restoring general default settings under certain circumstances may not apply to ringing time set by user (if
the time was extended by user beyond the ringing time set by administrator - see chapter on talk settings).
5.3.3 Default individual settings
Restores individual factory settings for each user.
§ Enter the menu Settings ( code )
§ Select Default settings (confirm with „ ” )
§ Select Default individual settings (confirm with „ ” )
§ Confirm again with „ ”
5.3.4 General default codes
Restores general factory codes (it is a table generated based on the panel serial number).
§ Enter the menu Settings ( code )
§ Select Default settings (confirm with „ ” )
§ Select Default general codes (confirm with „ ” )
§ Confirm again with „ ”
5.3.5 Delete RF tags memory
15
Deletes RF tags memory
§ Enter the menu Settings ( code )
§ Select Default settings (confirm with „ ” )
§ Select Delete RF tags memory (confirm with „ ” )
§ Confirm again with „ ”
5.3.6 Delete individual codes memory
Restores individual codes according to currently given table number (see 5.2.5)
§ Enter the menu Settings ( code )
§ Select Default settings (confirm with „ ” )
§ Select Delete individual codes memory (confirm with „ ” )
§ Confirm again with „ ”
15
Applies to Optima SL255R, Optima SL255RC
31