ELFON OPTIMA SL255 - General Unlocking Time; General RFID Tags; Miscellaneous Settings; Dialling after Confirmation

Settings → General settings → Relay settings , except lock sound settings and magnetic lock mode.
Additional benefit is the option to set this element to "Synchronize with lock". Independent from previous
relay settings, this mode allows using the electric lock settings. Current settings of the relay are saved (until
deactivation of this mode) and not used. Relay starts to act as electric lock.
To change the settings:
§ Enter the menu Settings ( code )
§ Select General settings (confirm with „ ” )
§ Select Relay settings (confirm with „ ” )
§ Select Synchronize with lock (confirm with „ ” )
§ Message informing about current setting appears (ENB or DIS), to change, press
„ ”
§ Message appears „SWITCH TO”, and using the arrows (up or down) select the required setting and
confirm with ”.
5.4.4 General unlocking time
Allows changing general unlocking codes,
§ Enter the menu Settings ( code )
§ Select General settings (confirm with „ ” )
§ Select General unlocking codes (confirm with „ ” )
§ Using arrows, select the code to be changed (confirm with „ ” )
§ The message appears "SWITCH TO". Enter new general code and confirm with „ ”.
5.4.5 General RFID tags
17
Edition of RFID tags, selection and deletion of one of the current tags or after applying the tag, ask whether
to add the tag.
§ Enter the menu Settings ( code )
§ Select General settings (confirm with „ ” )
§ Select General RF tags (confirm with „ ” )
§ Apply RF tag to the reader in order to add the tag (confirm with „ ” )
§ To delete a tag, select it using arrows (up or down) and press „ ”
5.4.6 Miscellaneous settings
Dialling after confirmation
If option is enable dialling takes place only after pressing the key „ ”. If option is disable dialling takes
place after 3s after entering the flat number or after pressing the key „ ”
§ Enter the menu Settings ( code )
§ Select General settings (confirm with „ ” )
§ Select Outdoor panel settings (confirm with „ ” )
§ Select Dialling after confirmation (confirm with „ ” )
17
Applies to Optima SL255R, Optima SL255RC
37