Smart ZB Thermostat 16 A
To disable boost mode:
1. Press O button once.
+1 flashes on thermostat matrix.
2. Press + button for thermostat to display – – (boost cancel).
3. Confirm by pressing O button.
Boost mode is cancelled.
Turning on/off the device manually
When thermostat is not in use, you can turn on/off the device manually
NOTE: Make sure to disable childlock before turning off the device.
Press – for > 10 s to turn off.
When thermostat is fully off:
• LED displays no room temperature
• Does not control room temperature
• Outputs remain off
• On initial interaction, the device shows an “X” on the display to show that it is
off.
Wake the thermostat by pressing –/O/+ once, thermostat matrix display X and
then press –/O/+ button for > 5 s to turn.
When the thermostat is turned on, it returns to its last state.
DUG_ZB Thermostat 16 A_ELKO-00 13
To Next Page
Loading...