ENGLISH
OPERATION
PROCEDURE
83
Presentation using “Utility Software” (Option)
with the USB-connected PC
Set [USB Mode] to [Application] on the OSD.
"Utility Software" (Option) contains the PC link software “Image Mate for Presentation”,
“Image Mate for Movie Creation” and the TWAIN driver "ELMO TWAIN DS" for the
following operations:
• Moving image saving to PC.
• Transfer of moving/still images to the PC
• Operation of this product from the PC
The PC equipped with Microsoft Windows 2000(SP4 or newer)/XP(SP2 or newer) is
recommended.
For details, refer to the "Utility Software" Installation Manual and the help folder with the
software.
When the front operating panel or the wireless remote control is in operation, do not connect/
disconnect the USB cable, or malfunction will be caused to this product.
Do not switch [USB Mode] on the OSD when this product is in USB-connection.
The USB cable compliant with USB2.0 is recommended.
To Next Page
Loading...
Need help?
General
