ENGLISH
VARIOUS
FUNCTIONS
AND OPERATIONS
94
State Presetting
The setting position of this product can be
saved/called. Up to 6 positions can be saved. The
presets that can be saved are as follows:
• Current zoom field angle
• Iris state
• White Balance state
• Edge Effect settings
• Gamma value settings
• Lighting ON/OFF
• Color/B&W selection settings
• Image Rotation state
• Text mode settings
• Posi/Nega settings
The saved state can be retained even if the power
supply is turned OFF.
Rotated position cannot be saved to “Power On”
setting. (Memory No.6 on remote control)
■ Presetting
When the [PRESET] button on the wireless remote
control is pressed and then the memory No. button
on the wireless remote control is pressed within
"approx. 4 seconds" or alternatively [Preset] is set to
[Memory No.] on the OSD, the operation state of the
current unit is saved in the specified memory No.
When the [PRESET] button on the wireless remote
control is pressed and then [6] of the memory No.
on the wireless remote control is pressed or
alternatively [Preset] is set to [Power On] on the OSD
and saved, such settings are called when the power
supply is turned ON the next time.
■ Calling
When the [CALL] button on the wireless remote
control is pressed and then the memory No. button
on the wireless remote control is pressed within
"approx. 4 seconds" or alternatively [Call] is set to
[Memory No.] on the OSD, the settings are set to
those of the selected No. When [Call] is set to
[Default] on the OSD, the settings are reset to the
factory settings.
Wireless remote control
Wireless remote control
Wireless remote control
To Next Page
Loading...
Need help?
General
