ENGLISH
59
BEFORE YOU USE
■ The power cord applicable to the local power specifications is attached.
Be sure to use the power cord applicable to your local power
specification.
■ Do not leave this product under direct sunlight or by heaters, or this
product may be discolored, deformed, or damaged.
■ Do not place this product in any humid, dusty, windy or vibrating
location. Use this product in the following environmental conditions:
Temperature: 5°C~40°C (41°F~104°F)
Humidity: 30%~85% (No condensation)
■ Use a soft, dry cloth for cleaning. Do not use any volatile solvent, such
as thinner or benzine.
■ Do not directly point the camera lens into the sun, or the camera may be
damaged.
■ Caring for the batteries:
• If this product is not used for a long time, take out the batteries from
the wireless remote control.
• Do not use rechargeable Ni-Cd batteries.
• Do not use new and old batteries, or batteries of different types
together.
• Do not try to recharge or short-circuit the batteries.
■ Luminescent and Black Spots
There may be some pixels that do not operate properly due to the use of
CCD Area Image Sensors that are made-up of many pixels. You may
experience luminescent or black spots on the screen; however, this is a
phenomenon of CCD Area Image Sensors and is not a malfunction.
■ Back up important data
Transfer the data in an SD card to a PC or other data storage means for
backup purpose. Note with care that the data in the SD card could be
lost due to failure or repair of this product.
To Next Page
Loading...
Need help?
General
