70
Twin Needle Sewing
As the name implies, the twin needle results in two
identical parallel rows of stitches – utility or
decorative.
The “Twin Needle” key should be pressed whenever
using a twin needle. Be sure to test the stitch
before sewing because twin needles are available in
a variety of widths. The maximum stitch width
available with the “Twin Needle” key activated is 3.0
and that maximum width is based on a standard
2 mm wide twin needle.
Tur n OFF the power switch and insert a twin
needle.
w
Threading the Machine
Place a spool of thread on each spool stand. Pull
up threads and follow the same procedure as single
threading except at points w, o, and !0.
w Right spool is in upper thread guide, left spool is
not.
o One thread is on right side of needle bar and the
other on the left.
!0 Thread by hand each needle from front to back.
NOTE: The built-in needle threader cannot be used
with a twin needle.
Tur n ON the power switch.
o
o
!0
To Next Page
Loading...
