4. Product-specific information
14 / 24 www.elobau.com 9010041B01M
4.2.6 Terminal connections
Tabelle 7
Information
Complete protective insulation in accordance with DIN EN 61140 is provi-
ded if the Safety evaluation unit is installed in a switch cabinet for operation.
WARNUNG!
.
Danger due to incorrect or bypassed fuses!
Incorrect installation of connections may result in irreversible personal
injury or death.
Never bypass or repair any fuses.
Observe the specified fuse values (See “Electrical data” on page 11).
Components Terminal Meaning
Safety input 1 6-9
Connection options:
Sensors with normally open/normally closed contact system
Safety input 2 10-13
Safety input 3 14-17
Safety input 4 18-21
Safety output 3-4
Switching dependent on:
• Safety input 1-4
• EDM input
EDM 22-23
Monitoring of external contactors.
If no external contactors are used, this input must be bridged!
Control output 24-26
Not suitable for safety functions!
Switching dependent on:
• Safety input 1-4
• EDM input
Operating voltage 1-2
24 V AC/DC (4621273E)
24 V DC (4621213E)
To Next Page
Loading...
