7. Maintenance and servicing
22 / 24 www.elobau.com 9010041B01M
7.1 Decommissioning
Only dismantle the Safety evaluation unit when it is deenergised.
Safety evaluation unit is out of operation.
7.2 Dismantling
Dismantling the Safety evaluation unit
1. Ensure a voltage-free state.
2. Undo the electrical lines.
3. Unscrew and remove screws.
Safety evaluation unit is dismantled.
7.3 Disposal
Abbildung 4
The symbol means that a product must be collected
separately from other waste when it reaches the end
of its service life in accordance with directive 2012/
19/EU. For more information, please contact elobau
or your dealer on site.
Dispose of packaging and used parts in accordance
with the relevant national regulations. Do not dispose
of the Safety evaluation unit with domestic waste;
e.g. dispose of at the collection centre of a waste ma-
nagement utility.
To Next Page
Loading...
